Stratus Coupe V6-3.0L VIN H (2001)
<RIGHT BANK>
Required Special Tools:
-
MB990767: End Yoke Holder
-
MD998443: Auto-lash Adjuster Holder
-
MD998713: Camshaft Oil Seal Installer
-
MD998715: Crankshaft Pulley Holder Pin
Removal Service Points
<<A>> Rocker Arm And Shaft Assembly Removal
1. Install special tool MD998443 as shown in the illustration so that the lash adjusters will not fall out. Never disassemble the rocker arm and
shaft assembly.
2. Loosen the rocker arm and shaft assembly mounting bolts, then remove the rocker arm and shaft assembly with the bolts still attached.
<<B>> Camshaft Sprocket Removal
