Stratus Coupe V6-3.0L VIN H (2001)
Use special tool MB998781 to secure the flywheel or drive plate, and remove the bolts.
Installation Service Points
>>A<< Crankshaft Rear Oil Seal Installation
1. Apply a small amount of engine oil to the entire circumference of the oil seal lip.
2. Use special tool MD998718 to tap in the oil seal as shown in the illustration.
>>B<< Drive Plate <A/T>/Flywheel <M/T>/Adapter Plate/Plate <M/T> Installation
Use special tool MD998781 to hold the flywheel or drive plate in the same manner as removal. Then install the bolts.