Stratus Coupe V6-3.0L VIN H (2001)
3.
Remove 3 bolts and 3 push pins in order to remove the right front fender inner lower splash shield (Fig. 3).
4.
Remove the drive belt. Refer to the service information available in TechCONNECT or the 2003 Sebring/Stratus Coupe Service Manual, Volume
4 (Publication No. 81-270-03031D) page 24-39.
5.
Remove the suction hose from the A/C compressor.
CAUTION:
Seal the hoses completely, otherwise the compressor oil and receiver will absorb water vapor easily, possibly damaging the compressor and
deteriorating performance. Plug the disconnected hoses and compressor openings to prevent foreign matter from getting into the system.
6.
Remove the discharge hose from the A/C compressor.
7.
Unplug the compressor clutch wiring connector.
8.
Remove the four A/C compressor mounting bolts.
CAUTION:
When removing the compressor, be careful not to spill the compressor oil.
9.
Remove the A/C compressor and place it on a suitable bench.