Stratus Coupe V6-3.0L VIN H (2001)
>>A<<THROTTLE POSITION SENSOR (TPS) INSTALLATION
1. Install the throttle position sensor to the throttle body as shown in the illustration.
2. Turn the throttle position sensor 90 degrees counterclockwise to set it, and tighten the screws.
3. Connect an ohmmeter between terminals 1 (ground) and 3 (output), or between terminals 3 (output) and 4 (power). Then, make sure that the
resistance changes smoothly when the throttle valve is slowly moved to the fully open position.
