dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Relays and Modules - Starting and Charging > < Air Bag Control Module|Locations|Page 164
Page 2
background image

Disconnect the negative battery cable from the battery and tape the terminal to prevent accidental connection and deployment.

INSTALLATION SERVICE POINTS 

>>A<<SRS-ECU INSTALLATION

WARNING:  The SRS may not activate if the SRS-ECU is not installed properly, which could result in serious injury or death to the vehicle's
driver or front passenger.

>>B<<Attachment of bracket mounting bolt (Grounding bolt)

Check the head mark "E" on the bolt and attach the grounding bolt.

>>C<<POST-INSTALLATION INSPECTION

1. Reconnect the negative (-) battery cable.
2. Turn the ignition switch to "ON" position.
3. Does the "SRS" warning light illuminate for approximately seven seconds, and then remain off for at least five seconds after turning "OFF."
4. If yes, the SRS system is functioning properly. If no, refer to Trouble Code Descriptions.

Relays and Modules - Starting and Charging > < Air Bag Control Module|Locations|Page 164