Stratus Coupe V6-3.0L VIN H (2001)
REMOVAL AND INSTALLATION
WARNING: Before removing the steering gear box, Center the front wheels and remove the ignition key. Failure to do so may damage the
SRS clock spring and render the SRS system inoperative risking serious injury.
Removal Service Points
<<A>> Tie Rod End Disconnection
CAUTION:
-
Use special tool MB991113 or MB990635 to loosen the nut from the ball joint instead of removing it.
-
Hang special tool MB991113 or MB990635 with ropes to prevent it from falling.
Use special tool MB991113 or MB990635 to disconnect the ball joint.
<<B>> Gear Box Assembly Removal
CAUTION: Be sure not to damage the bellows and the tie rod end dust cover when removing the gear box assembly.
Installation Service Points
>>A<< Pressure Tube Assembly Installation