Stratus Coupe V6-3.0L VIN H (2001)
1. Give 10 hard swings to the tie rod.
2. Measure the tie rod swing resistance with a spring balance.
Standard value: 4.0 - 18.6 N (17.8 - 82.7 lb) [1.0 - 4.9 Nm (8.7 - 43.4 inch lbs.)]
3. If the measured value exceeds the standard value, replace tie rod.
4. If the measured value is below the standard value, the tie rod can be re-used if it swings smoothly without excessive play.
TIE ROD END BALL JOINT DUST COVER CHECK
1. Check the dust cover for cracks or damage by pushing it with your finger.
2. If the dust cover is cracked or damaged, replace the tie rod end.
NOTE: Cracks or damage of the dust cover may damage the ball joint. If it is damaged during service work, replace the dust cover.