Stratus Coupe V6-3.0L VIN H (2001)
Using a socket, remove the oil seal and the ball bearing from the valve housing simultaneously.
<<F>> Circlip Removal
If the rack stopper is first turned counterclockwise, the circlip will get caught in the slot in the housing and the rack stopper will not turn.
1. Turn the rack stopper clockwise until the end of the circlip comes out of the slot in the rack housing.
2. Turn the rack stopper counterclockwise to remove the circlip.
<<G>> Rack Removal
Pull out the rack slowly. At this time also take out the rack stopper and the rack bushing simultaneously.
<<H>> Oil Seal Removal
CAUTION: Do not damage oil seal press fitting surface.
Partially bend oil seal and remove from rack bushing.
<<I>> Ball Bearing Removal