Stratus Coupe V6-3.0L VIN H (2001)
>>C<< Oil Seal/D-Ring Installation
1. Apply a coating of the Automatic transmission Fluid "DEXRON-II~" to the outside of the oil seal and O-ring.
2. Use special tool MB990927 to press fit oil seal until it touches rack bush end.
>>D<< Rack Installation
CAUTION: Do not close the vent hole in the rack with grease.
1. Apply a coating of Mopar(R) Multi-mileage Lubrication Part No. 2525035 or equivalent to the rack teeth face.
2. Cover rack serrations with special tool MB991213.
3. Apply Automatic transmission Fluid "DEXRON-II~" to special tool MB991213.
4. Align center of oil seal with rack to prevent retainer spring from slipping. Slowly insert rack from power cylinder side.
>>E<< Rack Bushing Installation
CAUTION: Do not allow oil seal retainer spring to slip out.
Wrap the rack end with vinyl tape, apply a coating of the Automatic transmission Fluid "DEXRON-II@", and then install the rack bushing and
rack stopper.
>>F<< Circlip Installation