Stratus Coupe V6-3.0L VIN H (2001)
Transmission Mount: Service and Repair
REMOVAL AND INSTALLATION
CAUTION: Mounting locations marked by should be provisionally tightened, and then fully tightened after placing the vehicle horizontally and
loading the full weight of the engine on the vehicle body.
Removal Service Point
<<A>> Transaxle Mount Bracket Removal
1. Install special tools MB991453 and MZ203827 to the vehicle body to support the engine and transaxle assembly.
2. Remove the center member and rear roll stopper bracket.
3. Remove the bolt and nut of the transaxle mount bracket.
4. After lowering the engine and transaxle assembly, remove the transaxle mount bracket.
Installation Service Point
>>A<< Transaxle Mount Stopper Installation