Stratus Coupe V6-3.0L VIN H (2001)
13. Check that the crimping amount (E) of the BJ boot band is at the standard value and that the crimping amount (F) of the BJ boot band is at the
limited value.
Standard value (E) 2.4 - 2.8 mm (0 10 - 0 11 inch)
Limited value (F) 9.5 mm (0.40 inch)
<If the crimping amount is larger than 28 mm (0 11 inch)> Readjust the value of (W) in step 10 according to the following formula, and then
repeat the operation in step 12 W = 5.8 mm (0.23 inch) - E
Example: If E = 2.9 mm (0.11 inch), then W = 2.9 mm (0.11 inch)
<If the crimping amount is smaller than 2.4 mm (0.09 inch)> Remove the BJ boot band, readjust the value of (W) in step 10 according to the
following formula, and then repeat the operations in steps 11 and 12 using a new BJ boot band W = 5.8 mm (0.23 inch) - E
Example If E = 2.3 mm (0.10 inch) then W = 3.5 mm (0.15 inch)
14. Check that the BJ boot band is not sticking out past the place where it has been installed If the BJ boot band is sticking out, remove it and then
repeat the operations in steps 11 to 13 using a new BJ boot band.