Stratus Sedan V6-2.7L VIN T FFV (2003)
Seat Track: Testing and Inspection
1. Remove power seat switch from seat.
2. Disconnect wire harness connector.
3. Check Pin 1 for battery voltage and Pin 5 for ground. On convertible models refer to step 5.
Switch Harness Connector Circuit Test
Fig.4 Switch Harness Connector
4. To test the seat motors, refer to the, and verify proper seat responses. Using two jumper wires, connect one to a battery supply and the second to a
ground. Connect the other ends to the seat wire harness connector as described in the Switch Harness Connector Circuit Test table.