Stratus Sedan V6-2.7L VIN T FFV (2003)
Manifold Pressure/Vacuum Sensor: Service and Repair
REMOVAL
REMOVAL - 4 CYLINDER
1. Disconnect the negative battery cable.
Fig.24 Generator And MAP Sensor
2. Disconnect electrical connector from MAP sensor.
3. Remove two screws holding sensor to the intake manifold.
REMOVAL - 2.7L
1. Remove the negative battery cable.
Fig.25 MAP Sensor - 2.7L
2. Disconnect the electrical connector from the MAP sensor.
3. Remove bolt from sensor.
4. Remove sensor.