Viper V10-8.3L VIN Z (2004)
Seats: Service and Repair
Seat
SEAT
REMOVAL
1. Open deck lid.
2. Remove four bolts to battery compartment cover and remove cover.
3. Disconnect and isolate the battery negative cable.
Fig. 1
4. Move seat as needed to access seat attaching front bolts and rear nuts (Fig. 1).
Fig. 2
5. Disconnect electrical connector (Fig. 2).
6. Remove seat from vehicle.
INSTALLATION
1. Place seat assembly in vehicle.
2. Connect electrical connector (Fig. 2).
3. Start front seat attaching bolts (Fig. 1).