dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Campaign - Engine Camshaft Sprocket Bolt Torque|Page 179 > < Campaign - Engine Camshaft Sprocket Bolt Torque
Page 2
background image

Use the labor operation number and time allowance shown.

Add the cost of the parts plus applicable dealer allowance to your claim.

NOTE:

See the Warranty Administration Manual, Recall Claim Processing Section, for complete claim processing instructions.

Parts Return

Not Applicable.

Dealer Notification 

All dealers will receive a copy of this dealer notification letter by DMAIL and by mail. Two additional copies will be sent through the DCMMS.
DealerCONNECT will be updated to include this notification in the near future.

Vehicle Lists, Global Recall System, VIP and Dealer Follow Up

All involved vehicles have been entered into the DealerCONNECT Global Recall System (GRS) and Vehicle Information Plus (VIP) for dealer inquiry
as needed. Involved dealers were also mailed a copy of their vehicle (VIN) list with the dealer notification letter.

GRS provides involved dealers with an updated VIN list of their incomplete  vehicles. The owner's name, address and phone number are listed if known.
Completed vehicles are removed from GRS within several days of repair claim submission.

To use this system, click on the "Service" tab and then click on "Global Recall System." Your dealer's VIN list for each recall displayed can be sorted
by: those vehicles that were unsold at recall launch, those with a phone number, city, zip code, or VIN sequence.

Dealers should perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to
schedule appointments for this repair.

Recall VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of
various states. Use of this information is permitted for this recall only and is strictly prohibited from all other use.

Owner Notification and Service Scheduling

All involved vehicle owners known to DaimlerChrysler are being notified of the service requirement by mail. They are requested to schedule
appointments for this service with their dealers. A copy of the owner letter is included.

Enclosed with each owner letter is an Owner Notification Form. The involved vehicle and notification are identified on the form for owner or dealer
reference as needed.

Additional Information

If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.

Customer Services Field Operations 
DaimlerChrysler Corporation

Ram SRT-10 Truck Repair Procedure

NOTE:

Refer to Viper repair procedure.

1.

Disconnect the negative battery cable and isolate it.

NOTE:

To enhance customer satisfaction, remember to reset the clock when you have completed the service procedure.

Campaign - Engine Camshaft Sprocket Bolt Torque|Page 179 > < Campaign - Engine Camshaft Sprocket Bolt Torque