Viper GTS V10-488 8.0L (1998)
Console: Service and Repair
Center Console
CENTER CONSOLE
REMOVAL
1. Remove ash receiver.
2. Remove instrument panel center bezel.
3. Remove gear shift handle.
4. Set parking brake.
5. Remove screws holding center console to instrument panel below heater control.
6. Remove screws holding rear of console to floor tunnel.
7. Separate center console cover from vehicle.
INSTALLATION
1. Position center console cover to vehicle.
2. install screws holding rear of console to floor tunnel.
3. Install screws holding center console to instrument panel below heater control.
4. Install gear shift handle.
5. Install instrument panel center bezel.
6. Install ash receiver.