dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - Spark Knock Using High Octane Fuel|Page 2352 > < Engine Controls - Flash Programming Failure Recovery|Page 2347
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Spark Knock Using High Octane Fuel

NUMBER: 18-019-03

GROUP: Vehicle Performance

DATE: May 2, 2003

THIS BULLETIN IS BEING PROVIDED IN ADVANCE. THE MDS2 MUST BE OPERATING WITH CIS CD2133 OR HIGHER, AVAILABLE
MAY 26, 2003.

SUBJECT:
Flash: Engine Spark Knock Using 91 Octane Gasoline

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

1997-2002

(SR)

Viper

NOTE:

THIS BULLETIN APPLIES TO DOMESTIC MARKET VEHICLES.

SYMPTOM/CONDITION:

Vehicle operator may experience engine spark knock using 91 Octane gasoline, when accelerating at medium to heavy throttle.

DIAGNOSIS:

Using a Scan Tool (DRBIII(R)) with the appropriate Diagnostic Procedures Manual, verify all engine systems are functioning as designed. If DTCs are
present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle operator describes the Symptom/Condition and is using premium 91 octane gasoline, perform the Repair Procedure.

PARTS REQUIRED:

EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

NOTE

WHENEVER A CONTROLLER IS REPLACED OR REPROGRAMMED, THE SOFTWARE IN THE CONTROLLER AND DRBIII(R) MUST
BE VERIFIED AS HAVING THE LATEST REVISION LEVEL.

Engine Controls - Spark Knock Using High Octane Fuel|Page 2352 > < Engine Controls - Flash Programming Failure Recovery|Page 2347