Viper GTS V10-488 8.0L (1998)
8. Slide outboard brake shoe toward rear of vehicle until the brake shoe clears the top of the caliper. Then lift brake shoe up and out between caliper
and outboard side of braking disc.
9. Slide inboard brake shoe toward rear of vehicle until the brake shoe clears the top of the caliper. Then lift brake shoe up and out between caliper
and inboard side of rotor.
10. Remove the rotor from the rear hub/bearing while sliding it out from rear brake caliper assembly.
11. Remove the hub nut mounting the hub/bearing to the yoke.