Viper GTS V10-8.0L VIN E (1999)
Crankshaft Damper-Installation
8. Install crankshaft damper.
9. Install crankshaft pulley.
10. If oil filter adapter was removed, install oil filter adapter using a new gasket to timing chain cover and torque screws to 11 Nm (95 inch lbs.). If oil
cooler lines were removed, install lines to oil filter adapter fittings.
11. If equipped with A/C, install compressor mounting bolts to cover and block. Torque screws to 23 Nm (200 inch lbs.).
12. Install generator and torque screws to 40 Nm (30 ft. lbs.).
13. Connect cam sensor electrical connector and generator wiring.
14. Install drive belt.
15. Install air cleaner assembly.
16. Fill cooling system.
17. Connect battery.