Viper GTS V10-8.0L VIN E (1999)
Tools Installed For Ball Joint Removal
Special Tool C-4150-A And Special Tool 6983 Correctly Installed
12. Install Puller, Special Tool C-4150A, on steering knuckle. The ball bearing in bolt of Special Tool C-4150A must be centered in stud of lower ball
joint and Spacer, Special Tool 6983, must be between Special Tool C-4150A and steering knuckle.
Seal Boot Removal From Ball Joint
13. Using a screw driver or other suitable tool, pry the seal boot off of the ball joint.
INSTALLATION
1. Install a NEW ball joint sealing boot on ball joint. Install sealing boot as far as possible on the ball joint assembly.