Viper RT-10 V10-8.0L VIN E (1997)
Brake Bleeding: Service and Repair
GENERAL INFORMATION
Before removing the master cylinder cover, wipe it clean to prevent dirt and other foreign matter from dropping into the master cylinder.
NOTE: Use Bleeder Tank Special Tool C-3496-B, or equivalent with Fluid Reservoir Pressure Bleeding Adapter Special Tool 6643, or
equivalent to pressurize the brake system for bleeding.
Follow pressure bleeder manufacturer's instructions, for use of pressure bleeding equipment. When bleeding the brake system. Some air may be
trapped in the brake lines or valves far upstream. As much as ten feet from the bleeder screw. Therefore, it is essential to have a fast flow of a large
volume of brake fluid when bleeding the brakes to ensure all the air gets out.
FRONT BRAKES
When bleeding the front brakes it is necessary that both halves of the caliper assembly be bled individually. The procedure for bleeding the front
caliper is described below, this procedure should be followed to ensure that the caliper assembly is adequately bled.