Viper RT-10 V10-8.0L VIN E (1997)
Heater Core: Service and Repair
Fig 38 Insulation Seal
The heater housing must be removed from the vehicle to service the heater core.
REMOVAL
1. Disconnect battery
2. Remove heater housing from the vehicle. Refer to:"Heater Assembly HVAC : Service and Repair" See: Housing Assembly HVAC/Service
and Repair
3. Remove the insulation seal from atop heater core.
Fig 39 Bracket Screws
4. Remove heater core retaining screws.
5. Note the position of the heater core. The heater hose tubes are offset and can only be installed in the proper direction.
Fig 40 Heater Core Removal
