Viper RT-10 V10-8.0L VIN E (1997)
Brake Light Bulb: Service and Repair
REMOVAL
1. Remove trunk lining as necessary to gain access to the trunk pan behind the tail lamp.
2. Remove plugs covering the access holes in the trunk pan for the tail lamp.
3. Remove plastic seal nuts holding the tail lamp to the tail lamp closure panel through the access holes.
CAUTION: Do not drop the plastic seal nuts between the tail lamp closure panel and the trunk pan or the tail lamp closure panel will need to be
removed.
4. Separate the tail lamp from the tail lamp closure sure panel.
Tail Lamp Bulb
5. Rotate socket counterclockwise one half turn and pull socket from lamp.
6. Rotate and pull bulb from socket.
INSTALLATION
1. Push and twist bulb into socket.
2. Push socket into lamp and rotate socket clockwise one half turn.
3. Position the tail lamp in the tail lamp closure panel.
4. Install plastic seal nuts to hold the tail lamp to the tail lamp closure panel through the access holes.
5. Install the plugs to cover the access holes in the trunk pan for the tail lamp.
6. Install the trunk lining.
