Viper RT-10 V10-8.0L VIN E (1997)
![background image](/dodge/viper_rt-10/v10-8.0l_vin_e/Page-636001.png)
Engine Control Module: Service and Repair
Fig 24 PCM Location
NOTE: The PCM is mounted underhood near the brake booster (Fig. 24).
REMOVAL
1. Make sure that the ignition key is in the off position.
Fig 23 PCM Cover
2. Remove the PCM cover (Fig. 23).
3. Remove electrical connectors from PCM.
4. Remove PCM mounting screws. Remove PCM.
INSTALLATION
1. Reverse procedure for installation.