Viper RT-10 V10-8.0L VIN E (1997)
Starter Relay: Testing and Inspection
WARNING: CHECK TO ENSURE THAT THE TRANSMISSION IS IN NEUTRAL WITH THE PARKING BRAKE APPLIED.
1. Verify battery condition. Battery must be in good condition with a full charge before performing any starter tests. Refer to Battery Tests.
2. Perform the preceding starter and solenoid tests BEFORE performing starter relay tests. Refer to Starter and Solenoid Test.
3. Locate and remove the starter relay. The Starter relay is located in the Power Distribution Center (PDC). Refer to PDC cover for location.
Starter Relay Tests
4. After the starter relay has been located and removed, refer to Starter Relay Tests.
