Drive Belt: Service and Repair

Make

Dodge

Model

Viper SRT-10

Engine

V10-8.4L

Year

2008

Section

Drive Belt › Service and Repair › Procedures

MaintenanceProcedures · page 1 of 3

Drive Belt: Procedures

INSPECTION

Satisfactory performance of the belt driven accessories depends on belt condition and proper belt tension.

Belt replacement under any or all of the following conditions is required:

-

Excessive wear.

-

Frayed cords.

-

Severe glazing.

The Poly-V belt with a back driven pulley may develop minor cracks across the ribbed side (due to reverse bending). These minor cracks are considered
normal and acceptable. Parallel cracks are not.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

03 Maintenance