dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Keyless Entry Module|Removal|Page 22 > < Keyless Entry Module|Diagrams|Page 19

Viper SRT-10 V10-8.4L (2008)

Page 1
background image

Keyless Entry Module: Service and Repair
Removal

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair/Removal

and Replacement/Instrument Cluster - Removal.

3. Remove the mounting fasteners.
4. Disconnect wire harness connector and remove module.

Keyless Entry Module|Removal|Page 22 > < Keyless Entry Module|Diagrams|Page 19