W250 3/4 Ton Pickup 4WD V8-318 5.2L VIN T 2-BBL (1983)
FIGURE 3-C
3.
At the engine compartment, route harness, PN 4362286, through existing clips for main body harness to the bulkhead.
NOTE:
DUE TO VARYING WHEEL BASE LENGTHS, EXCESS WIRING MAY EXIST. WRAP EXCESS
WIRING BETWEEN THE TWO CLIPS REFERENCE IN FIGURE 3-C AND TIE WRAP IN TWO (2)
PLACES.
4.
Plug the bare terminal of body wiring harness, PN 4362286, into cavity #12 of the engine side of the bulkhead connector.