Workshop Repair Manuals

Dodge Workshop Manuals

[PREV PAGE] [NEXT PAGE]

dodge Workshop Repair Guides


W 100 Pickup V8-360 5.9L VIN I (1984)

Relays and Modules > Relays and Modules - Starting and Charging > Starter Relay > Component Information > Testing and Inspection

Page 1
background image

Starter Relay: Testing and Inspection

1.

Place transmission in Neutral and apply parking brake.

2.

Check for battery voltage between starter relay battery terminal and ground.

3.

Connect jumper wire on starter relay between battery and ignition terminals.

4.

If engine does not crank, connect a second jumper wire to starter relay between ground terminal and good ground and repeat test.

5.

If engine cranks in step 4, transmission linkage is misadjusted or neutral safety switch is defective.

6.

If engine does not crank in step 4, starter relay is defective.

Relays and Modules > Relays and Modules - Starting and Charging > Starter Relay > Component Information > Testing and Inspection

[PREV PAGE] [NEXT PAGE]