W 150 Pickup V8-360 5.9L VIN W (1987)
Axle Lube (1 quart can)
REPAIR PROCEDURES
This procedure involves replacing the synchronizer assembly and axle lube.
Transfer Case
See appropriate service manual for replacement procedures.
Front Axle
1.
Using a suction pump, remove as much of the axle lubricant as possible.
NOTE:
IT IS NOT NECESSARY TO REMOVE THE DIFFERENTIAL COVER.
2.
Refill the axle with Mopar High Performance Synthetic Axle Lube, PN 4467707, as specified below.
"W" and "AW" Truck:
Fill to within 1/4" of the bottom of the fill plug hole (approximately 84 ounces).
N5 Dakota 4 x 4:
Fill to 1/2" below the bottom of the fill plug hole (approximately 40 ounces).
NOTE:
OVERFILL CAN RESULT IN LUBRICANT "FOAMING" AND/OR UNIT OVERHEATING.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Refer to Labor Operation Time Schedule for operation and time