W 150 Pickup V8-360 5.9L VIN W (1987)
FIGURE 5
5.
Coat the bare blade terminal of the engine overlay harness, PN 4362295, liberally with Mopar Multi-Purpose Grease, PN 4318063, and snap
terminal into insulator located on engine side of jumper wiring assembly, PN 4362558 (Figure 5).
NOTE:
DISCONNECT FEMALE INSULATOR FROM MALE INSULATOR PRIOR TO INSERTION OF TERMINAL,
AND BE SURE THAT WIRE OF ENGINE HARNESS MATES WITH SAME COLOR WIRE OF JUMPER.