W 250 Pickup V8-360 5.9L VIN I (1987)
Band: All Technical Service Bulletins
A/T - Clunk or Squawk Noise Shifting Into Reverse
Models
1986-1987 "M" (Gran Fury/Fifth Avenue/ Diplomat) Passenger Car & "D, N, W, AD, AW & B" Model Trucks
Subject
Reverse Shift "Clunk" or "Squawk"
Index
TRANSMISSION
Date
April 27, 1987
No..
21-06-87 (C2-21)
P-1439
This bulletin supersedes Technical Service Bulletin 21-17-86, which should be removed from your files.
This bulletin includes Domestic Truck, and a correction to the A-998, A-999 package number listed in Technical Service Bulletin 21-17-86.
SYMPTOM/CONDITION
A "clunk" or "squawk" when shifting from park into reverse, or neutral into reverse, on subject model vehicles built prior to September 1, 1986, should
be diagnosed using the following procedures.
DIAGNOSIS
1.
With engine off, place transmission in neutral and apply parking brake.
2.
Raise vehicle on hoist.
3.
Grasp prop shaft and rotate as far as possible in either direction. Hold in this position.
4.
Using chalk or a crayon, mark a line across the pinion flange and the edge of the axle housing.
5.
Rotate shaft in opposite direction as far as possible. Hold in this position.
6.
Make a second mark on the axle housing opposite the mark on the pinion flange.
7.
Measure distance between marks on axle housing.
8.
If distance between marks is greater than 1/4", refer to appropriate service manual to correct rear axle backlash, and retest for "clunk" or
"squawk."
9.
If distance between marks is less than 1/4" or "clunk" or "squawk" remains after backlash correction, replace components as required using the
following chart.
PARTS REQUIREMENT
Transmission
Transmission
Vehicle
Prop Shaft
Model
Parts Required
Description
Required *
A-904-T
A-998 & A-999
1 Package PN 4443183 - Consists of: