dodge Workshop Repair Guides

Dodge Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Transfer Case Actuator: Customer Interest
Front Axle - No 4X4 Engagement

No.
02-02-86

P-1425

Date
April 21, 1986

Index
FRONT SUSPENSION

Subject

Front Axle Disconnect Will Not Engage

Models

1985-1986 "W" & "AW" Models With Front Axle Disconnect

SYMPTOM/CONDITION

No engagement of four wheel drive after shift into "4H" or "4L".

DIAGNOSIS

Check the actuator at the front axle for vacuum lines being disconnected. If the lines are disconnected, it could be due to mud or snow packing around
the vacuum motor and vacuum lines, and causing the vacuum lines to disconnect from the motor.

REPAIR PROCEDURE

This repair involves the installation of a revised vacuum motor shield.

1.

Remove the present vacuum motor shield from the axle.

2.

Reinstall vacuum lines and new clamps, PN 6032173, on vacuum motor.

3.

Install new vacuum motor shield, PN 04384135.

4.

Check vacuum motor for proper operation.

POLICY:
Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

02-60-05-90

0.3 Hrs.

FAILURE CODE:
65 - Leaks

Transmission and Drivetrain > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - Transfer Case > Transfer Case Actuator > Component Information > Technical Service Bulletins > Customer Interest for Transfer Case Actuator: > 020286 > Apr > 86 > Front Axle - No 4X4 Engagement

< PREV PAGE NEXT PAGE >