W 350 Pickup V8-360 5.9L VIN W (1984)
4.
Route and secure the engine overlay harness, PN 4362295, along the existing main engine wiring harness using the existing wiring clips and
two tie wraps, PN 6015756 (Figure 1-B).
FIGURE 1C - ENGINE COMPARTMENT WIRING
5.
Route and secure the engine overlay harness, PN 4362295, along the existing headlamp-to-dash main engine wiring harness to the bulkhead
connector using the existing wiring clips and three tie wraps, PN 6015756 (Figure 1-C). Loop and tape any excess wire of the engine overlay
harness.
FIGURE 1D - TERMINAL END OF BULKHEAD CONNECTOR (ENGINE COMPARTMENT SIDE)
6.
Coat the bare blade terminal of the engine overlay harness, PN 4362295, liberally with Mopar multi-purpose grease PN 4318063, and snap
into cavity #14 of the engine side of the bulkhead connector (Figure 1-D).
B.Instrument Panel Harnesses Pn 4362289, All Models