Concord L6-258 4.2L VIN C 2-bbl (1982)
Camshaft: Service and Repair
Fig. 8 Valve timing
1.
Remove distributor and ignition wires and the fuel pump.
2.
Remove radiator from vehicle. If equipped with A/C, remove condenser and receiver with refrigerant lines attached and position out of way.
3.
Remove cylinder head and valve lifters.
4.
Remove timing chain cover.
5.
Rotate crankshaft until timing marks on sprockets are aligned,.
6.
Remove sprockets and chain.
7.
Remove front bumper or grille as required to remove camshaft.
8.
Remove camshaft.
9.
Reverse procedure to install.
