Eagle Sedan L6-258 4.2L (1984)
FIGURE 8
9.
On Jeep models, press the inner bearing seal (G), from the hub using the inner race and bearing installer 5078 (Fig. 8).
NOTE:
Be sure the word "Jeep" on tool 5078 is facing downward toward the hub.
FIGURE 9
10.
On Eagle models, position bearing race remover tool 5075 between inner and outer bearing races (H) (Fig. 9).
11.
On Jeep models, position bearing race remover tool 5076 between inner and outer bearing races (H) (Fig. 9).
12.
Position press pin 5074 (Fig. 9) on bearing race remover tool.
FIGURE 10