Eagle Sedan L6-258 4.2L (1984)
FIGURE 7
^
Press the hub (E) out of the inner bearing (F) with press pin 5074 (Fig. 7).
FIGURE 2 - FRONT WHEEL BEARING ASSEMBLY
6.
On Eagle models, remove the O-ring seal (11) from the hub (Fig. 2). Discard the seal, it is not reusable.
7.
On Jeep models, remove the carrier seal (15) (Fig. 2). Discard the seal, it is not reusable.
8.
On Eagle models, remove the inner bearing (12) (Fig. 2).