eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Starting and Charging > < Front Brake Pad Wear Sensor - Wire Broken|Page 2081
Page 3
background image

FIGURE 5

7.

Reinstall the plastic grommet in the frame rail.

8.

Install retaining clips PN T3078069 (D), and retaining clip PN T3079133 (E) as positioned in Figure 5. Verify the correct wire routing by
cycling the steering wheel from stop to stop and check for binding. Reposition the wire(s) as necessary and secure the clips.

POLICY:

Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No.

08-90-89-90

. . . . . . . . .

0.4 Hrs.

FAILURE CODE: 11 - Broken or Cracked

Starting and Charging > < Front Brake Pad Wear Sensor - Wire Broken|Page 2081