eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

A/C Control Panel - Revised Design|Page 2480 > < Diagram Information and Instructions|Page 2475
Page 1
background image

Control Assembly: Technical Service Bulletins
A/C Control Panel - Revised Design

Models

1988 Medallion

Subject

A/C control Panel Replacement

Index

HEATING/AIR CONDITIONING

Date

November 7, 1988

No.

24-51-88

P-4611

(C24-51)

A revised A/C control panel has been released for the 1988 Medallion. The new control panel (PN T1032837) is wired differently and may be equipped
with a micro switch that has terminals narrower than those used on the original control unit.

In order to install the new control unit on an earlier model, it may be necessary to use 5 step down adaptor wires to assure a proper electrical connection.
The step down wires are included with the replacement control panel.

REPAIR PROCEDURE

Refer to the M.R. 289 for A/C control panel removal procedures.

With the control panel removed, inspect the micro switches.

FIGURE 1

If the terminals on the original panel are larger than the terminals on the replacement part, install the step down wires and connect the panel to the

A/C Control Panel - Revised Design|Page 2480 > < Diagram Information and Instructions|Page 2475