Medallion L4-2165cc 2.2L (1988)
FIGURE 2
2.
Remove the wire from the shock absorber retaining clip.
3.
Strip 3/4 in. of insulation from both ends (B) of the broken wire(s). See Figure 2
4.
Slide 1-1/2 in. of heat shrink tubing (C) over the brake pad end of the wire(s). See Figure 2
FIGURE 3
5.
Twist the two ends together and solder using resin core solder. See Figure 3
FIGURE 4
6.
Slide the heat shrink tubing over the soldered joint and shrink the tubing with a heat gun. See Figure 4