Medallion L4-2165cc 2.2L (1988)
Wheel Hub: Service and Repair
1. Raise and support vehicle.
2. Remove wheel(s).
3. Remove brake rotor and caliper assembly.
4. Tie caliper to the spring or shock. Do not allow the brake line to support weight of the caliper.
5. Using toll Rou.604.01 or equivalent to secure wheel hub, remove driveshaft attaching nut.
6. Remove bolts attaching bearing to the steering knuckle.
7. Remove hub and bearing from knuckle and driveshaft assembly.
8. Reverse procedure to install. Torque bearing to knuckle attaching bolts to 20 ft. lbs. Torque driveshaft attaching nut to 184 ft. lbs.
