Summit L4-1795cc 1.8L SOHC (1995)
-
Check the oil seal for cracks or damage.
-
Check the rear hub unit bearing for wear or damage.
-
Check the rear rotor for chipped teeth.
INSTALLATION SERVICE POINT
REAR SPEED SENSOR INSTALLATION
1. Provisionally install the speed sensor to the sensor bracket.
2. With the caliper assembly and brake disc removed, insert a feeler gauge into the space between the speed sensor's pole piece and the rotor's
toothed surface, and then tighten the speed sensor bracket at the position where the clearance at all places is within the standard value.
Standard value: 0.3-0.9 mm (.012-.035 in.)
