eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Heater Mode Control Selector - Inoperative|Page 3580 > < Heater Mode Control Selector - Inoperative|Page 3574
Page 1
background image

Control Assembly: All Technical Service Bulletins
Heater Mode Control Selector - Inoperative

NO.: 24-05-92

GROUP:

Air Conditioning

DATE:

Jul. 13, 1992

SUBJECT:
Heater Mode Selector Control Inoperative

MODELS:

1992 (B8) Colt Vista/Summit Wagon

SYMPTOM/CONDITION:

Some vehicles built prior to 01-01-92 may have a heater mode selection control that is inoperative due to the air outlet changeover damper cable being
bent at the damper lever.

DIAGNOSIS:

If the heater air distribution will not change to a selected outlet when the mode selection knob is turned, remove the left side cover from the floor console
(Fig. 1). Visually inspect the air outlet changeover damper cable at the damper lever (Fig. 2). If the cable is a braided type cable and is bent at the
damper lever, replace it as described in the repair procedure with a wire type cable. If the vehicle already has the wire type cable, inspect the system for
other possible causes and repair them as necessary.

PARTS REQUIRED:

Heater Mode Control Selector - Inoperative|Page 3580 > < Heater Mode Control Selector - Inoperative|Page 3574