eagle Workshop Repair Guides

Eagle Workshop Service and Repair Manuals

Turn Signal Flasher > < Diagram Information and Instructions|Page 4513
Page 1
background image

Combination Switch: Service and Repair

The combination switch includes the headlight, headlight dimmer, turn signal and wiper/washer switches.

1. Disconnect battery ground cable.
2. Remove steering wheel, refer to Steering and Suspension/Steering/Steering Wheel/Service and Repair.
3. On Colt and Summit models, remove knee protector.
4. On all models, remove upper and lower column covers.
5. Remove wiring harness retaining straps, then disconnect electrical connectors.
6. Remove attaching screws, then the combination switch assembly.
7. Reverse procedure to install.

Turn Signal Flasher > < Diagram Information and Instructions|Page 4513