Summit Wagon AWD L4-2350cc 2.4L SOHC (1995)
Ignition Coil: Component Tests and General Diagnostics
Coil Resistance Test
Ignition Coil Inspection
1. Measurement of the primary coil resistance
Measure the resistance of the positive terminal 11 and negative terminal 12 of the ignition coil.
Standard value: 0.9-1.2 Ohms
2. Measurement of the secondary coil resistance
Measure the resistance of the positive terminal 11 and the high-voltage terminal.
Standard value: 20-29 K Ohms
Inspection
Ignition Coil
1. Measurement of the primary coil resistance
Measure the resistance of the positive terminal No.11 and negative terminal No.12 of the ignition coil.
Standard value: 0.9 - 1.2 Kilo-Ohms
2. Measurement of the secondary coil resistance
Measure the resistance of the positive terminal No.11 and the high-voltage terminal.
Standard value: 20 - 29 Kilo-Ohms
Spark Plug Cable Test
Spark Plug Cable Test
1. Disconnect, one at a time, each of the spark plug cables while the engine is idling to check whether the engine's running performance changes or
not.