Summit Wagon AWD L4-2350cc 2.4L SOHC (1995)
Fig.50 Side Bearing Spacers Change
j.
Check drive gear and drive pinion for proper tooth contact, refer to "Pre-Disassemble Inspection" for adjustment procedure.
k. Measure drive gear runout at shoulder on reverse side of drive gear. If drive gear runout exceeds 0.002 inch, reinstall by changing phase of
drive gear and differential case, and measure.
Fig.30 Drive Gear Runout Measurement
11. On Colt Vista and Talon models, apply a semi-drying sealant to installation surface of differential cover and vent plug, torque cover bolts to
22-30 ft. lbs.