Summit Wagon FWD L4-2350cc 2.4L SOHC (1995)
Door Lock: Description and Operation
Vehicles With Keyless Entry System
-
When the lock switch of the transmitter is pushed with all the doors and liftgate in unlocked condition, the door lock signal will be output (0 V)
from the keyless control unit terminal No. 12. to turn on (lock side) the door lock power relay 1 and 2 to lock the doors and liftgate.
-
When the transmitter unlock is pushed with all the doors and liftgate in locked condition, the door unlock signal will be output (0 V) from the
keyless control unit terminal No. 14. to turn on (unlock side) the door lock power relay 2 to unlock the door of the driver's side.
-
When the transmitter unlock is pushed once again with the same condition as above, the door unlock signal will be output (0 V) from the keyless
control unit terminal No. 13. to turn on (unlock side) the door lock power relay 1 to unlock all the doors and liftgate.
-
When the keyless entry system is operated to lock the door of the driver's side, the dome light flickering signal will be output (system voltage)
twice from the keyless entry control unit terminal No. 11. And when the door of the driver's side is unlocked, the dome light illuminating signal
will be output (0 V) for three Seconds from the keyless entry control unit terminal No. 11.
NOTE:
Following are the functions that the keyless entry control unit system has in addition to the above:
-
Unless any of the doors are opened or closed within 30 Seconds after the door has been unlocked by the keyless entry system, all the doors and
liftgate will be automatically locked. Further, when a code which is different from the code that the receiver memorizes is received 30 times
consecutively in a minute, the system will not operate for 10 minutes.
-
The system will not operate with the ignition switch inserted and any of the doors and liftgate open.
