Summit Wagon FWD L4-2350cc 2.4L SOHC (1995)
Fig. 31 Silent Shaft Lock
a. Remove plug on side of engine block, Fig. 31.
b. Insert a Phillips screwdriver into hole to block left silent shaft. If screwdriver will only go in 0.79-0.98 inch as it strikes against counterbalance
shaft, turn sprocket once, realign timing mark and check that screwdriver goes in 2.36 inches or more. Screwdriver should not be taken out
until timing belt is installed.
c. Remove oil pump sprocket nut then sprocket.
8. Mark rotational direction on timing belt B prior to removal.
