Talon AWD L4-1997cc 2.0L DOHC Turbo (1991)
If none of the above conditions apply, then turn the speed adjusting screw until the engine is running at BASIC idle.
6.
Turn off the engine.
7.
Disconnect the grounding jumper wire from the diagnosis connector.
8.
Disconnect the grounding wire form the ignition timing connector and reinstall the waterproof connector.
9.
Start the engine and let it idle for about 5 minutes. Verify that the engine idle is smooth and has returned to CURB Idle speed.
10.
Disconnect and remove the tachometer.