Talon AWD L4-1997cc 2.0L DOHC Turbo VIN F SMFI (1997)
ABS Main Relay: Testing and Inspection
ABS Motor Relay/Valve Relay Check
1.
Remove the fender splash shield.
Removing Relay Box Mounting Bolts
2.
Remove the relay box mounting bolts.
Removing Cover Relay Box Cover With Screwdriver
3.
Insert the tip of a screwdriver into the space between the hydraulic unit and the relay box cover and use it to open the tab at one place, and then
remove the cover.
4.
Take out all of the relays from the relay box and check the continuity between the terminals when power is not supplied and when power is
supplied.
Checking Continuity Between Terminals (ABS Motor Relay)
With No Current Flow
Between terminals 85 - 86 should be 30 - 60 ohms
Between terminals 30 - 87 should be No continuity (infinity)
With Current Flow Between Terminals 85 - 86
Between terminals 30 - 87 should be continuity (approximately 0 ohms)
Checking Continuity Between Terminals (ABS Valve Relay)
With No Current Flow
Between terminals 85 - 86 should be 60 - 120 ohms
Between terminals 30 - 87a should be continuity (approximately 0 ohms)
Between terminals 30 - 87 should be no continuity (infinity)
With Current Flow Between Terminals 85 - 86
Between terminals 30 - 87a should be no continuity (infinity)
Between terminals 30 - 87 should be continuity (approximately 0 ohms)